Still forklift batteries

The traction batteries for Still forklifts are an essential component to ensure the autonomy, power and safety of these electric machines. Choosing the right model and maintaining it correctly allows you to take full advantage of its performance and extend its service life.

In this guide you will find practical information to select the battery compatible with your Still model, learn about the different types of technology available, and apply good installation and maintenance practices to ensure maximum reliability and performance over time.

Practical guide: how to identify the compatible battery

Correctly identifying the compatible battery for your Still truck is critical to ensure performance and avoid replacement errors. Here are the essential steps to check that the new battery conforms to the original specifications.

VIDEO · QUICK GUIDE

How to identify the compatible battery for your Still forklift

  • Where to locate the nameplate.
  • Which measurements and voltage to record.
  • How to read the reference code and the number of cells.
  • The most common mistakes and how to avoid them.
Practical guide to identify the correct battery

1. Check the nameplate

Locate the truck’s nameplate, usually located on the chassis or near the driver’s seat. There you will find the key data: model, nominal voltage (V) and capacity (Ah). These values determine the type of compatible traction battery and prevent replacement errors.

2. Measure the battery compartment.

With the forklift off, measure the inside of the metal box where the battery is installed. Measure the length, width and height, leaving a small margin for ventilation and extraction. Avoid common mistakes such as mounting a battery higher or heavier than recommended, as this may affect stability or make it difficult to close the compartment.

3. Check the connector and polarity

Check the type of connector (DIN or REMA, depending on the model) and its position inside the compartment.
Make sure that the polarity of the cables matches that of the equipment, as an incorrect connection may cause electrical faults or damage the charger.

4. Still forklift models and compatible batteries

See below the table of Still truck models with their compatible traction batteries, voltage and capacity ratings.
This information will help you confirm the right battery for your truck and ensure full compatibility.

Modelo StillVoltajeCapacidad AhMedidas Cofre
CS2024345621x281x784
CS2024420621x281x784
CS2024465718x288x784
CS2024465621x281x784
CS20N24315799x217x798
CS20N24345799x217x798
CS20N24375799x217x798
CS20N24420799x217x798
CS20N24465799x217x798
CS30Z24315799x217x798
CS30Z24345799x217x798
CS30Z24375799x217x798
CS30Z24420799x217x798
CS30Z24465799x217x798
CS30Z24465799x302x798
CS30Z24620799x302x798
CX24345800x210x790
CX2024315799x217x798
CX2024345799x217x798
CX2024375799x217x798
CX2024420799x217x798
CX2024465799x217x798
CXD24345800x210x790
CXM1024315799x217x798
CXM1024345799x217x798
CXM1024375799x217x798
CXM1024420799x217x798
CXM1024465799x217x798
CXS1624315799x217x798
CXS1624345799x217x798
CXS1624375799x217x798
CXS1624420799x217x798
CXS1624465799x217x798
ECUSF2024300652x210x665
EFG1/142524690825x420x630
EFG1.5/500424735850x496x634
EFG1.5/500424805850x496x634
EFG100124575870x340x610
EFG1624920845x497x565
EFSM48465832x523x784
EFU24700832x328x784
EFV24700832x328x784
EGU12524240785x205x510
EGU12524270785x205x510
EGU1624150660x145x560
EGU1624150660x145x590
EGU1624150660x145x580
EGU16N24172660x145x690
EGU16N24200660x145x690
EGU18N24172660x145x690
EGU18N24200660x145x690
EGU20SN24250617x208x627
EGU200024240615x275x525
EGU3024250617x208x627
EGU3024250621x209x627
EGU300024160610x268x465
EGU300024345622x282x626
EGU300024375622x282x626
EGUH24200642x218x689
EGUS24420621x281x784
EGUS200024420621x281x784
EGUS200024465621x281x784
EGUX24210637x200x604
EGUX24230637x200x604
EGUX200024230640x200x605
EGV1024160405x292x600
EGV1024180405x292x600
EGV1024210405x292x600
EGV1024230405x292x600
EGV1224160405x292x600
EGV1224180405x292x600
EGV1224210405x292x600
EGV1224230405x292x600
EGV1224200405x292x600
EGV12024200405x292x600
EGV1424250827x162x627
EGV1424200827x162x627
EGV1424375827x216x627
EGV1624250827x162x627
EGV80024210820x190x600
EGVS1624345827x216x627
EGVX24180416x156x535
EGVX(1/2bat.)12180416x156x535
EGVS1424270800x210x615
EGVS1424345800x210x615
EGVS1424375800x210x615
EK1024460827x270x627
EK1024620832x274x784
EK1124775839x324x754
EK1148465832x415x784
EK12484201220x280x782
EK12484651220x280x782
EK12483601220x280x782
EK1248560832x523x784
EK1248620832x523x784
EK-X24560832x274x784
EK-X24620832x274x784
EK-X24840832x382x784
EK-X24930832x382x784
EKX1048560832x523x784
EKX1048620832x523x784
EKX10(MERCADONA)24620832x274x784
EKX10(MERCADONA)48465832x523x784
EKX10(MERCADONA)48465832x415x784
EKX10(MERCADONA)48620832x523x784
ESSM24560832x274x784
ESSM24620832x274x784
ESU2024345736x300x687
ESU2024375736x300x687
EX60-25805601025x708x782
EX60-25806201025x708x782
EX60-30805601025x708x784
EX60-30806201025x708x784
EXU-S2224345718x288x784
EXU-S2224375718x288x784
EXU-S2224420718x288x784
EXU-S2224465718x288x784
EXU-S2224360718x288x784
EXU-S2224560718x373x784
EXU-S2224620718x373x784
EXU1624170660x146x655
EXU1624172660x146x655
EXU1624200660x146x655
EXU1824230617x208x627
EXU1824230621x209x627
EXU1824105621x209x627
EXU2024250617x208x627
EXU2024250621x209x627
EXU20HRV24200642x218x689
EXU-1624150645x153x595
EXUH-1824142645x153x595
EXUH-1824150645x153x595
EXV10-1224172660x145x685
EXV10-1224200660x145x685
EXV1224213560x228x578
EXV1224225560x228x578
EXV14C24240795x210x580
EXV14Compact24345795x210x580
EXV14TROG6524270795x210x580
EXV14TROG6524315795x210x580
FM485601032x440x784
FM-Q485601027x436x782
FM-Q486201027x436x782
FM-Q487001032x527x784
FM-Q487751032x527x784
FM12485601218x424x784
FM12486201218x424x784
FM12486251218x424x784
FM12487001218x424x784
FM12487751218x424x784
FM12488401218x424x784
FM14485601218x352x784
FM14485601218x424x784
FM14486201218x352x784
FM14486201218x424x784
FM14486401218x352x784
FM14486251218x424x784
FM14487001218x424x784
FM14487751218x424x784
FM14488401218x424x784
FM17485601218x352x784
FM17485601218x424x784
FM17486201218x352x784
FM17486201218x424x784
FM17486401218x352x784
FM17486251218x424x784
FM17487001218x424x784
FM17487751218x424x784
FM17488401218x424x784
FM20485601218x424x784
FM20486201218x424x784
FM20486251218x424x784
FM20487001218x424x784
FM20487751218x424x784
FM20488401218x424x784
FM14485601218x424x784
FM14486201218x424x784
FM14486251218x424x784
FM14487001218x424x784
FM14487751218x424x784
FM14488401218x424x784
FM20485601218x424x784
FM20486201218x424x784
FM20486251218x424x784
FM20487001218x424x784
FM20487751218x424x784
FM20488401218x424x784
FMX485601032x440x784
FS-X3348930976x660x925
FU-X24500827x270x627
FU-X24560832x274x784
FU-X24620832x274x784
FUV2024620832x274x784
GC126024180420x159x500
GQ485601032x440x784
GX485601032x440x784
GX/GQ485401027x616x627
GX/GQ486901027x616x627
GX/GQ487501027x616x627
KANVAN24345800x210x790
LTX2024170488x194x665
LTX2024200488x194x665
MX-X805601025x708x784
MX-X806201025x708x784
MX-X80620708x537x849
MX-X807001025x852x784
MX-X808401025x852x784
MX/Q13.3804651023x561x782
MX10487751032x527x784
MX13241085832x436x784
MX15489301032x620x840
MX15-4806201025x852x784
MX15-4806201023x849x782
MX15.3807751020x416x782
MX20488401032x620x784
MX20489301032x620x784
MX30807751025x424x784
MX-X489801032x710x784
MX-X4810851032x710x784
R0.6/0.8/0.924460815x265x595
R0624460827x324x627
R0624575827x324x627
R06-0624575827x324x627
R06-0624625827x324x627
R06-0648345827x411x627
R06-0648375827x411x627
R07-20H802401023x705x462
R07-20H803201023x705x462
R08803201023x705x462
R08-20802401060x810x450
R08EFSW/2802401065x810x455
R0924460760x310x600
R0924735810x470x610
R0924805816x465x595
R09/1.024575816x340x595
R09/1.5241120832x490x760
R09/1.5241240832x490x784
R09/1.624575827x324x627
R09/1.624920827x486x627
R09/125024805827x432x627
R09/1.2(SERIE0926)24805827x432x627
R1024525816x340x595
R1024575816x340x595
R1024575816x465x595
R1024625816x340x615
R1024805816x465x595
R1024920808x487x595
R10/1.2(SERIE1005)24805827x432x627
R10/1.5241240832x490x784
R10/1.624920827x486x627
R10/1SE24575827x324x627
R1424690832x490x700
R1424980832x500x730
R14/1.2SERIE1442241240832x490x784
R141.580420972x624x760
R14/1.580465972x624x760
R20241150827x597x627
R20-1.648625827x735x627
R20-1.648690827x735x627
R201.548500827x735x627
R201.848690827x735x627
R202.048690827x735x627
R202.048750827x735x627
R20I48575827x627x627
R25-2548775970x615x760
R252.51348930982x615x760
R5024525816x433x595
R5024630816x377x595
R5024690816x377x595
R5024805816x433x595
R5024875816x433x620
R50-1.524920827x486x627
R50-1.5803751023x561x782
R50/1.024575816x340x595
R50/1.0500224805827x432x627
R50/1.5500424920827x486x627
R501.0/1.224875827x432x627
R501.0/1.224700827x432x627
R50EFG1/500124575827x324x627
R624575810x335x605
R60804201016x560x735
R60-1.6804201023x561x782
R60-1.6804651023x561x782
R60-4.0807751025x996x784
R60-4.0809301025x996x784
R60-4.0809901025x996x784
R60-5.0809901025x996x784
R60/2.0806201025x708x784
R60/2.0806201023x705x784
R60/2.5806201025x708x784
R60/2.5806201023x705x784
R60/4.0809301023x492x784
R601.6803751025x564x784
R601.6804201025x564x784
R601.6804651025x564x784
R602.0806201025x708x782
R603.0806201025x852x784
R603.0807001025x852x784
R603.0807751025x852x784
R603.0808401025x852x784
R60/1.5803451023x561x625
R924420827x324x627
R924575815x420x610
R924750830x490x655
R924875830x490x655
R924920830x490x655
R07-25C804601023x705x627
R07-25C805001023x705x627
R08-1280180870x810x394
R08-1280240870x810x394
RX18487001032x527x784
RX20486251027x526x627
RX20485001027x526x627
RX20487001032x527x784
RX20-16485001027x526x627
RX20-16485751027x526x627
RX20-16486251027x526x627
RX20-16P485751027x526x627
RX20-16P486251027x526x627
RX20-18484501019x526x525
RX20-18485751027x526x627
RX20-18486251027x526x627
RX20-18P487001032x527x784
RX20-18P487751032x527x784
RX20-20485751027x526x627
RX20-20486251027x526x627
RX20-20P485751027x526x627
RX20-20P486251027x526x627
RX20(nueva)3ruedas48500827x519x627
RX20(nueva)3ruedas48625827x627x627
RX20(nueva)3ruedas486251027x526x627
RX20(nueva)3ruedas48660827x627x627
RX20(nueva)3ruedas48750827x735x627
RX20(nueva)4ruedas48500827x519x627
RX20(nueva)4ruedas48625827x627x627
RX20(nueva)4ruedas486251027x526x627
RX20(nueva)4ruedas48660827x627x627
RX20(nueva)4ruedas48750827x735x627
RX5024690827x378x627
RX5024875827x432x627
RX5024700827x432x627
RX50-1324805827x432x627
RX50-1324875827x432x627
RX50-1324700827x432x627
RX50-1524920827x486x627
RX50-15241000827x486x627
RX5010C24500827x270x627
RX60-1.6804651025x564x784
RX60-30806201025x852x784
RX60-40808401025x996x784
RX50-1024625827x315x625
SU2024345790x210x810
SU2024375790x210x810
SU2024420790x210x810
SU2024465790x210x810
SV1224465790x210x810
Trog5424620799x301x798
TSP60001.0487751032x527x784
UNS140484201220x280x782
UNS140484651220x280x782
UNS140483601220x280x782
UNS161485601218x424x784
UNS161486201218x424x784
UNS161486251218x424x784
UNS161487001218x424x784
UNS161487751218x424x784
UNS161488401218x424x784
V10Serie01548465832x415x784
WP1224150660x145x590
WP232024250621x209x627

If you do not have the original part number, our technicians can verify the compatibility and recommend the right battery for your Still truck.

Request free verification

Batteries compatible with STILL® forklifts and other equivalent industrial models.

How to choose a Still forklift battery?

Before replacing the battery of a Still forklift truck, it is important to analyze the actual working conditions and the characteristics of the equipment. This step ensures that the new battery is suitable for the intended use, maintains the required power and offers optimum energy efficiency.

The main factors are the type of operation (single or multiple shift), the temperature of the warehouse and the required capacity (Ah) according to the day and the weight of the loads. Correctly evaluating these variables helps to optimize loading cycles and reduce premature system wear.

It is also essential to respect the technical standards defined by Still, such as voltage, compartment dimensions and connector location. Following these specifications ensures compatibility, safe installation and reliable long-term operation.

Knowing these differences is key to selecting the right battery and ensuring compatibility with each truck model.

How much does a Still forklift battery cost?

The price varies depending on the technology and voltage of the equipment. Below you will see indicative ranges and how to estimate the TCO.

Reference prices by voltage and technology
Voltage Lead-Acid Lithium-Ion
24 V Starting at 2.000 € Starting at 6.000 €
48 V Starting at 3.000 € Starting at 16.000 €
80 V Starting at 5.000 € From 25.000 €

Total cost (TCO)

It includes purchase, maintenance, consumption and service life. The right choice reduces the long-term operating cost.

Financing and leasing

Flexible payment options that facilitate fleet modernization with a controlled investment.

Traction battery types: lead-acid and lithium-ion

Still equips its trucks with two major technologies: lead-acid and lithium-ion.

Technical comparison of traction batteries for forklift trucks Still
Feature Lead-acid Lithium-ion
Reliability Proven industrial technology; stable performance High with BMS and thermal control
Initial cost More competitive Superior
Maintenance Water refilling and periodic cleaning Low intervention; specialized service
Repairability High; replaceable cells/bridges Modular; sometimes complete replacement
Spare parts Wide standard availability Manufacturer dependence
Thermal performance Stable over a wide range More sensitive to extremes
Recyclability Mature chain (>90%) In development
TCO Very competitive in standard applications Advantage in fast loads/intensive shifts

As shown in the table, lead-acid (Pb) forklift batteries combine reliability, good performance and low operating cost, making them the most cost-effective and safest option for Still electric trucks.

Pb

Lead-Acid

Robust and stable technology, with a proven safety record in demanding industrial environments.

Li-ion

Lithium-ion

Solid performance with proper BMS and effective thermal management.

Original and compatible Still batteries: key differences

Still electric forklifts can be equipped with either the manufacturer’s original batteries or compatible versions manufactured by specialized companies. Both options offer safe and efficient operation, as long as the same electrical and mechanical parameters of the equipment are respected.

At Rebatex, through our Voltem brand, we develop traction batteries that are fully compatible with Still models, complying with the quality and safety standards required by European standard EN/IEC 60254. These batteries match the performance of the originals and offer additional advantages such as custom manufacturing, local maintenance, and a more competitive cost.

To ensure compatibility with each model, the following technical parameters must match:

Voltage (V) and capacity (Ah)
Chest dimensions and total weight
Connector type and position and polarity

Choosing a certified and correctly sized battery ensures safe installation, consistent performance and long service life for Still electric trucks.

How to install a new traction battery in your Still truck?

Replacing the battery of an electric forklift truck requires caution and the use of the proper equipment, especially because of the weight and voltage these systems handle.

By following these steps you will be able to do it in a safe, orderly and efficient way:

REBATEX Technical Demonstration

Assembly and replacement procedure for traction batteries in electric forklifts.

Disconnect power and prepare the work area
Before starting, fully switch off the forklift and remove the ignition key. Wear insulated gloves and protective goggles. Disconnect the main battery connector to eliminate any current flow. Work on a level, well-ventilated surface, free of flammable materials.
Lift the hood or battery compartment cover. Locate the retaining clips, pins or bolts securing it to the chassis. Traction batteries can weigh up to 700 kg; use appropriate lifting equipment such as another forklift, overhead crane or hydraulic jib.
Carefully disconnect the positive (+) and negative (–) power cables. If the connector or cables are damaged, replace them along with the new battery. Check polarity: red to (+) and black to (–). Reversing polarity can cause severe damage.
Use non-conductive slings or straps to avoid contact with terminals. Lift slowly while keeping the battery level, and place it on a stable surface. Avoid impacts or tipping of the assembly.
Align the battery with the chassis compartment and use lifting equipment to slide it gently into place. Secure the original fixings and ensure that no cables are pinched or bent when closing the cover.
Connect the terminals respecting polarity. If possible, tighten them with a torque wrench (~23 Nm on lead terminals). Reconnect the main connector and perform a full initial charge before use.
Check the charge indicator and ensure there are no leaks, strange smells or overheating. Log charges and discharges from day one to extend service life and keep the warranty valid.

Why does your battery choice affect the performance of your Still forklift?

The traction battery is the element that determines the actual performance of a Still electric truck. Its capacity, voltage and condition directly influence lifting power, working autonomy and operational safety.

An adequate and well-maintained battery keeps the traction force constant throughout the day, reducing charging times and avoiding unnecessary stops. On the other hand, a deteriorated or inadequate battery can cause overheating, loss of power and higher energy consumption.

Main signs of wear or failure:

Symptoms of battery wear or failure:

  • Significant reduction in autonomy between charges.
  • System or charger overheating.
  • Loss of power in elevation or traction.
  • Longer or irregular loading times.

Detecting these symptoms early and replacing the battery prevents further damage to the truck and improves equipment productivity.

Maintenance and accessories that extend service life

Good maintenance makes the difference in lead-acid (Pb) traction batteries: more stable autonomy, fewer breakdowns and longer service life.

Recommended systems and accessories

  • Automatic filling (BFS/Aquamatic): fills all cells at once, fast and safe.
  • Distilled water carts/knobs with filter and hose.
  • Intelligent HF chargers with IUIa curve, programmable equalization and load recording.
  • Level/temperature indicators and terminal protectors.

Routine use and loading

  • Charge at the end of each shift; avoid going below 20-30% charge.
  • Equalize according to manufacturer (e.g., weekly or every X cycles).
  • Add water only after charging and up to the marked level (distilled water).
  • Maintain ventilation of the cargo area (as per EN 62485-3).

Temperature and storage

  • Optimum temperature: 20-25 °C. Continuous heat accelerates degradation; cold reduces autonomy.
  • Long shutdowns: store at 50-70 % and maintenance recharge every 4-6 weeks.
60″ Maintenance Checklist
  • Correct electrolyte level (add distilled water after charging).
  • Cables and connectors without looseness or abnormal heating.
  • Clean and dry surface, free of sulphation.
  • Updated charge records and equalizations.

Frequently asked questions about Still forklift batteries

Can I replace my Still forklift battery myself?
Yes, as long as you follow all safety guidelines and use proper lifting equipment: disconnect the main connector, switch off the truck, and handle the battery with safe lifting devices.
Can I replace my lead-acid battery with a lithium one?
It is possible as long as the voltage and dimensions are compatible and the charging system is adapted. It is also important to check the weight and BMS integration.
What happens if the nominal capacity is different?
A lower capacity will reduce runtime; a higher capacity may change the total weight and balance of the truck. The ideal choice is to keep the capacity recommended by Still.
Where should I recycle the used battery?
It must be delivered to an authorized collection point or handled through your distributor. At Rebatex we manage collection and recycling according to RAEE regulations.
What are the signs of a defective battery?
Fast discharge, overheating, power loss, or irregular charging times are signs of deterioration. A technical inspection is recommended.

Technical support and expert advice

At Baterías y Amperios we put engineering and experience at the service of your fleet. We verify compatibility, custom manufacture and offer direct assistance in traction batteries for Still trucks.

How to buy the right battery online?

Before ordering, please confirm the voltage, capacity (Ah) and dimensions of your battery box. Our technical team can verify these data free of charge, checking also the type of connector and the compatibility with the charger.

In this way, we ensure that the battery fits perfectly in your Still truck and maintains its performance from the first cycle.

Check compatibility free of charge

Why choose a certified distributor such as Baterías y Amperios?

Because we manufacture under the UNE-EN 60254 standard, assembling each traction battery with high-density European components and individual quality control. Our solutions are designed for Still electric trucks and are adapted to the weight, voltage and compartment of the corresponding model.

By working with a certified distributor, you ensure durability, energy efficiency and direct technical support throughout the life of the battery.

How to request a technical compatibility study?

If you do not have the original reference, our technical service can perform a free compatibility study. We analyze the Still model, the number of hours per shift, the dimensions of the compartment and the type of connector.

With this information we design a traction battery that precisely fits your operational needs.

Request technical study

Do you have doubts about the compatible battery for your Still?

Contact our technical team and receive personalized advice. We verify compatibility, performance and mounting options according to your forklift model.

Talk to a technician

Warranties and after-sales services

Still traction batteries are covered by a standard 24-month warranty against manufacturing defects. This coverage includes cell, connector and electrical component failures, provided the manufacturer’s recommended maintenance has been followed.

What is covered by the warranty

  • Manufacturing defects in cells or modules.
  • Connectors or bridges with origin defect.
  • Performance deviations due to structural failure.

Maintenance requirements

  • Use of approved and calibrated chargers.
  • Documented record of loads and revisions.
  • Check water level and adequate ventilation.

Usual exclusions

  • Knocks or reversed polarity during assembly.
  • Sulfation or overheating due to lack of water.
  • Use of non-compatible chargers.

In case of incident

1

Identifies: Still model, serial number and date of purchase.

2

Documents: photographs of the box, connectors and voltages per element.

3

Contact: technical service or authorized distributor for diagnosis or replacement.

Do you have questions about coverage or need technical support?

Consult after-sales assistance
Baterias y Amperios
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

preloader