Drive Element Kit 24V 640Ah

Traction Elements Kit 24V 640Ah composed of 12 elements of 2V 8EPZS640. The Voltem forklift battery is built to withstand 70% deep discharge and has a long lifespan of 2,500 charge/discharge cycles. It is designed to resist vibrations and shocks, thanks to its black polypropylene container. Which makes it very resistant and robust. With the guarantee of made in Europe following high quality standards.

The 24V 640Ah traction battery kit is delivered with flexible connections.

Description

Elements 24V640Ah forklift battery 24V 640Ah

The 24V 640Ah Traction Elements Kit is composed of DIN 8Epzs640 elements of the highest quality, which offer superior performance and reliability thanks to its robust construction based on open tubular lead technology cast under pressure (PzS).
The negative plates have a flat configuration with pasted oxide and the separator is of the microporous type. The container and the lid of the element are hermetically welded and are highly resistant to shocks and the most extreme temperatures.
The terminals are specially designed to ensure that the elements are completely watertight, they are also connected through insulated flexible cables. Its screwed connections facilitate the assembly and replacement of the elements.
They come equipped with caps with swing closure and electrolyte level indicator, which facilitates the escape of gases produced during charging and protects the battery from electrolyte spills.

Custom Manufacturing
We use the most advanced technology to manufacture traction batteries. Our database of forklift trucks and pallet trucks allows us to design and manufacture the necessary battery for any make and model of machine.

Technical Data Kit Traction Elements Kit 24V 640Ah
Voltage: 24V
Capacity C5: 640Ah
Model: 8Pzs640
Measurements Cell 2V: 198 x 425 x 155 mm
Weight: 440 Kg
Garanty: 2 years

Video Manufacturing Traction Battery


WE COLLECT YOUR USED BATTERY

Reducing the purchase cost is always an advantage and Rebatex allows us to make discounts of up to 15% by collecting your used batteries. With this method, in addition to obtaining significant savings, we will all be more respectful of the environment.

DELIVERED READY TO INSTALL

The assembly of the battery by the customer is simple thanks to the fact that we send the battery completely assembled, you will only have to insert it into the machine and connect the power connector.video icono Video Traction battery assembly

CONNECTIONS AND MOUNTING

We have a large stock of traction elements, to speed up delivery times as much as possible. We carry out the assembly with flexible screwed connections, and PVC-headed screws, which allow safety protection against electric shocks.

24V 840Ah Forklift Battery Connections Assambly Plan
24v 640ah battery connections


LIST OF ELEMENTS
Units Description
5 Conector Flex 50mm2 : 95mm
1 Conector Flex 50mm2 : 130mm
4 Conector Flex 50mm2 : 170mm
2 Battery Protector Screwed or Welded
1 Identification label and characteristics
1 Acid Extractor Syringe
1 Kit documentation
12 Short cap for DIN elements
22 Black Screws M10 x 18mm
2 Positive and Negative terminal screws
12 Cell PZS – 8 placas , 2V 640 Ah

FORKLIFT TRUCKS

This 24 volt battery is valid for the machines:


CESAB BIT 1200
GANSOW TOP LINE 150 BF 90
PIERALISI MINI 1000
PIMESPO-FIAT-OM E 08 N
PIMESPO-FIAT-OM E 10 N

Additional information

Weight 440 kg
Dimensions 40 × 90 × 42 cm

You may also like…

preloader