Pylontech US5000 Lithium battery 4.8kWh 48V

Description

Pylontech US5000 4.8kWh 48V lithium battery.

Lithium-Ion Phosphate storage integrated by LiFePo4 modules, with a standard 19-inch rack format. This allows us to expand the system when necessary, up to a maximum of 16 modules without HUB access. This modularity makes it suitable for both small and large accumulation systems, taking up much less space.

Pylontech US5000 Battery Features

• Rated capacity: 4.8kWh
• Nominal voltage: 48VDC
• Peak current: 200A for 15 sec.
• Useful capacity: 4.56kWh
• Discharge voltage: 44.5-53.5VDC
• Charge/discharge current: 75A
• Charging voltage: 52.5-53.5VDC
• Maximum discharge: 95%.
• Life cycles: >6000 @25ºC
• Maximum units in parallel: 16
• Measurements (mm): 442x420x161
• Weight: 38 kgs
• Working temperature 0-55ºC
• Design life +15 years at 25ºC
• IP20 protection
• IEC/CE/UN38.3/UL Certifications
  

  Data-sheet-us5000

Compatibility of Pylontech 4.8kw lithium battery with Inverters

It can be connected to most of the inverters currently on the market. It includes, for its connection, numerous communication parameters to make this battery able to share its charge data and thus operate correctly and safely. It has a Canbus communications port and RS485 to communicate with the inverters. Here is a list of inverters compatible with Pylontech US5000.

Pylontech Compatible List V2.02 ESS-20211227 All Inverter Brands

Parallel mounting and connection of several Pylontech US5000 lithium batteries

The Pylontech US5000 battery can be mounted in parallel with more modules up to a maximum of 16 batteries without HUB access (up to 72.96 kWh) via the ethernet communication cable included with each battery. For mounting, Brackets (not included) that allow stacking up to 6 batteries or a rack cabinet, which allows the integrity of the system, must be used.

Outstanding benefits of the Pylontech US5000 solar lithium battery

The Pylontech US5000 lithium battery is a state-of-the-art lithium accumulator with numerous advantages over lead acid batteries.

– Less weight and volume: Thanks to its high energy density, we have stored 4.8 kW in only 38 kg of weight. For a lead acid battery we would require about 98kg for the same function. The dimensions are also smaller so we need less space and can even make portable systems in applications that require it thanks to its greater manageability.

– Higher number of cycles: Lithium has superior qualities of use than lead acid. While a lead-acid battery has about 1500 cycles at 80% discharge, the Pylontech US5000 lithium battery can perform more than 6000 cycles at 95% discharge.

– Maintenance-free: The lithium battery does not require any maintenance or liquid refilling during its lifetime. As it is a sealed module, it does not give off gases or odors and can therefore be installed indoors. It should be avoided to work in extreme temperature and humidity environments. In order to extend its useful life.

– Better value for money than the previous versions Pylontech us2000 and us3000c. It has a greater depth of discharge, reaching up to 95% for 6000 cycles.

– Faster charging speed: The lithium battery can be charged at a rate of 2C, even if necessary at 1C so that if we have a charger with sufficient power in 2 hours we can charge the battery completely discharged. If necessary, a full charge can also be performed in 1 hour. The BMS automatically balances all batteries to ensure that they have the same charge.

– Increased safety: It has a multi-protection system against temperature, voltage, SoH and SoC.

– Compact and modular design allows for easy installation, expansion and upgrading.

– Wide range of working temperatures from -10ºC to 50ºC without affecting service life.

– Depth of discharge at 95% without memory effect, unaffected by temperatures, and without voltage drops.